3 Mega-Pixel 20.8" monochrome LCD suited for chest X-rays with capability to display 2048 shades of gray simultaneously (Model: ME355i2)

A high-performance model not only offers high image quality and high-accuracy, but also is loaded with quality maintenance managemnet features.

---

A 3MP display best suited for chest X-rays. Loaded with a high luminance, high contrast LCD panel, it delivers excellent image quality with a luminance uniformity compensation feature and a capability to display 2048 shades of gray simultaneously. It also comes with a hardware-based pivoting function for fast image display in portrait orientation.

Features:

Newly developed luminance stabilizing system λ-Sentinel II

λ-Sentinel II consists of a luminance sensor and luminance control circuit. The luminance sensor that is attached in front of the screen constantly monitors and accurately stabilizes luminance on the screen surface by sending feedback to the control circuit.

Remote grayscale check and remote calibration functions

Conformance testing to DICOM GSDF and calibration can be remotely accomplished. These features minimize the burden on display administrators. * An optional PM Medivisor software is required

Simultaneous display of 2048 shades of gray

Combined with a viewer software, 2048 shades of grapy (11 bit) can be simultaneously displayed. It realizes smoother grayscale display required for medical image displays. * A viewer software that supports TOTOKUs multi-shade display system is reguired for 11-bit simultaneous display.

Luminance equalizer λ-Uniformity Congruence

Is built in to achieve highly accurate luminance uniformity across the screen. Luminance unevenness is minimized in the final tune-up prior to shipping. * Images shown are for illustrative purposes only

Calibration function

Calibrates luminance and gamma to enable smooth grayscale display that is faithful to DICOM GSDF. * An optional calibration kit is required

Hardware pivot function for fast drawing in portrait on landscape orientation

Stress-free operation is made possible by the fast drawing speed even in portrait orientation

Dual Link input

provides smooth display of motion pictures

Color/monochrome conversion function for multi-display setups with both color and monochrome display

Color/monochrome conversion function for multi-display setups with both color and monochrome displays

OSD Information Display

With a push of a button, the displays current status can be checked such as the display model, total operating time, actual measurement of luminance, and calibration settings.

LED indicator to inform of current status

A glance at the LED indicator tells you the displays current operating status.

Enhanced convenience with utility software:Advanced power saving*

The backlight dims as the screensaver starts, reducing power consumption and preventing unnecessary deterioration of the backlight. * This feature may not be available, depending on the specifications of the graphics card used. Gamma check 18 points of luminance values are measured and plotted into a graph. Ambient light and display luminance measurement The built-in illuminance and illuminance sensors measure display luminance and ambient illuminance.

Worldwide medical safety standards

This display is certified under various medical safety standards that are much more demanding than those for general-purpose IT equipment.

Specifications:

Model name		ME355i2
LCD	Technology	20.8-inch, Monochrome,TFT active matrix
	Display Area	423.9 mm x 318.0 mm
	Pixel Pitch	0.207mm x 0.207mm
Visual Perfomance	Contrast Ratio	900:1(typ)
	Maximum Luminance	1000 cd/m², (calibrated to 410 cd/m² by factory default)
	Viewing Angle	170 °
	Available Resolution	640x480(VGA),800x600(SVGA),1024x768(XGA),2048x1536(QXGA)
	Grayscale Display	12 bit (3826 shades of gray) to 256 shades of gray along with the customized viewer,simultaneous display of 11 bit(2048 shades of gray) is possible
Input Signal	Input Sync Signal	DVI 1.0 compliant
	Plug and Play	DDC2B compliant
Input Power Supply	Input	AC Adapter 100V-240V(±10%) 50/60Hz
	Maximum Power Consumption	85W (with power management feature)
Features	Calibration Control	Luminance, Gamma,Capability of saving 3 sets of LUT settings(An Optional calibration kit is required).
	OSD Information Display	Model Name,Serial No.,Total operating time,Calibration settings(Operating time from Last Calibration,Luminance,Gamma,etc..), Current Luminance , etc..
	USB Hub	USB Rev 2.0 compliant,Self powered,USB upstream connector(x1),USB downstream connector(x2)
	Other Features	Luminance Uniformity Correction Function,Hardware Pivot function,Color/Monochrome conversion function,LED indicator
Standards		UL60601-1,CS C22.2 No.601.1,MDD/CE,FDA510(k),FCC-B,VCCI-B,MIC,(CCC:pending)
Physical Characteristics	Dimensions (WxHxD)	Landscape:474mmx 468.4/529.9mmx220mm Portrait: 367mmx521.9/583.4mmx220mm
	Weight	Approx. 11kg(Approx 6.8kg without tilt stand)
	Tilt Stand	Tilt,Swivel,Protrait/Landscape rotation
	Mount	100mm VESA complaint
	Security Slot	On the back of the panel and the tilt stand
Accessories		AC Adapter,Power Card(3P),DVI cable,USB Cabel,User Manual