Outdoor Electrical Enclosures Environment Monitoring systems (Model: EMS200)

Outdoor Electrical Enclosures Environment Monitoring systems (Model: EMS200)

Outdoor Electrical Enclosures Environment Monitoring systems (Model: EMS200)

EMS200
  • Overview
  • Download
Outdoor Electrical Environment Monitoring System monitors critical environmental conditions (such as temperature, humidity, and water leakage) that could destroy network components in your server room. When a sensor goes out of range of a configurable threshold, the system will notify you via email, SNMP traps, web-page alerts, a visual indicator (red LED), voice phone calls (via Automatic Voice Dialer System), and SMS messages (via USB 3G modem).
 

Features

  • Monitor and manage server room environmental conditions over IP.
  • Sensors supported:
    • 2 temperature/humidity sensors.
    • 5 digital inputs sensitive to contact closure.
    • Sensors are hot plugable.
  • One output relay for control of external devices.
    • Relay activates upon alarm or via the user interface.
  • Supports IP network video cameras for live view of any facility.
    • One integrated view - see different Web cameras side-by-side with physical and environmental parameters.
    • Any programmed event can trigger a snapshot from an IP camera.
  • Monitor (ping) up to 16 IP network devices.
    • Alerts are sent if devices are not responding.
  • Two USB ports for connecting USB modem or for downloading log data to USB flash drive, and one USB console port for serial terminal interface.
  • Available with optional internal battery backup.
    • Alerts are sent when there is a power outage and when power returns.
  • Create multiple alerts for any installed sensor.
  • Sensor conditions (events) can be configured to trigger alerts by themselves, and/or be used in combination with other events to trigger Smart Alerts.
    • Configure up to 50 events.
    • Up to 20 Smart Alerts can be configured to use different event combinations to send alert messages.
  • Alerts are posted in message log, which is accessible through Web user interface.
  • Integrates with various Open Source monitoring packages - Nagios and MRTG.
  • Linux inside.
  • Supports network security scanners.
  • Backup and restore system configurations.
  • Flexible Zero-RU mounting.
    • Mounting tabs included.
    • Optional DIN mounting available.
  • Security: HTTPS, SSHv2, SSLv3, IP Filtering, LDAPv3, AES 256-bit encryption, 16-character username/password authentication, user account restricted access rights.
  • Use in data centers, co-lo sites, web hosting facilities, telecom switching sites, POP sites, server closets, or any unmanned area that needs to be monitored.
  • Optional industrial mini environment monitoring system for high temperature environments. This industrial system has the ability to operate and monitor in harsh environments at high temperatures up to 167°F (75°C).
 

Specifications

Temperature/Humidity Inputs
  • Two female RJ45 connectors for connecting temperature sensors, humidity sensors and/or combined temperature/humidity sensors.
    • Two levels of user-defined alerts - non-critical and critical.
Dry Contact Closures
  • Five screw terminal pairs for connecting dry contact devices and the liquid detection sensor.
  • Potential-free.
  • Output voltage: +5 V DC
  • Current limited to 10 mA
  • Maximum resistance to close contact: 300K Ohm
Output Relay
  • One screw terminal pair.
  • Potential-free relay switch contacts.
  • Maximum switching load: 0.5A at 125 VAC, 1A at 30VDC
USB Port
  • Two female USB Type A connectors for connecting USB modem or for downloading log data to USB flash drive.
  • One female USB Type B connector for connecting a PC for serial terminal access.
Ethernet Port
  • One female RJ45 connecto.
  • 10/100 Base-T Ethernet interface.
Optional Back-Up Battery
  • Rechargeable sealed lithium battery.
  • Provides back-up for two hours
Protocols
  • HTTP/HTTPS, SNMP V1/V2c/V3, SMTP, TCP/IP, Syslog, SNTP, DHCP, SSHv2, SSLv3, LDAPv3, AES 256-bit, 3DES, Blowfish, RSA, EDH-RSA, Arcfour, IPV6, WAP 2.0
  • Compatible with any SNMP management software.
  • Operates and configures via HTTP/HTTPS web page, Telnet, SSH, or USB serial interface.
  • An IP address can be assigned to the ENVIROMUX-MINI-LXO automatically by a DHCP server.
  • Generates SNMP traps, email alerts, and syslog messages.
    • Alerts are posted in event log, which is accessible through Web user interface.
    • Email alerts can be sent to 17 addresses.
Dimensions
  • WxDxH: 5.82x3x1.75 in (148x76x44 mm)
Power
  • 110 or 220 VAC at 50 or 60 Hz via AC adapter.
  • Power consumption: 5 W
Environmental
  • Operating temperature:
    • ENVIROMUX-MINI-LXO: 32 to 104°F (0 to 40°C).
    • ENVIROMUX-MINI-LXO-IND: 32 to 167°F (0 to 75°C).
  • Storage temperature: -20 to 176°F (-20 to 80°C).
  • Operating and Storage Relative Humidity: 17 to 90% non-condensing RH.
Regulatory Approvals
  • CE, RoHS
  • EN51055, EN50121-3-2
Warranty
  • Two years
 

Control Methods

  • Configuration can be done over the Internet/LAN via Web page.
  • Supports Internet Explorer 6.0 and higher, Firefox 1.5 and higher, Netscape 9, Google Chrome, Safari 1.3 and higher for MAC, and Safari 3.0 and higher for PC.
  • Configure sensor's thresholds, alarm methods, formats of alerts, and system data log.
  • View/edit sensors' current values, thresholds and alert statuses.
    • All sensors connected to the ENVIROMUX-MINI-LXO can be viewed on one summary page.
    • User configurable settings allow sensors to return to normal status when alert condition clears, without manually acknowledging/dismissing the alert.
  • View/edit entries stored in the system logs.
    • Event log records system events such as alerts, user login/logout, failed email messages, etc.
    • Data log records samples of sensor readings. User specified sampling time period.
    • Both the event log and the data log store up to 1,000 entries.
    • The log can be downloaded as a tab-delimited plain text file.
  • Configure IP information (address, subnet mask, default gateway, DNS, etc.), user administrative settings, and data logging settings.
  • Up to 16 users can access the web page at one time.
  • Configure up to 50 sensor conditions (events)
  • Configure up to 20 Smart Alerts to use different event combinations to send alert messages.
Front Panel Interface
  • LEDs indicate the following:
    • "Fault" (red) lights up if a sensor goes out of range of a configurable threshold.
    • "Power" (green) lights up when the device is powered/all clear.
USB Serial Interface / Telnet / SSH
  • Configure, control and monitor over the text-based menu system accessible via USB console port, Telnet, and SSH.
  • Access is controlled via username/password.
    • System stores encrypted login information.
  • Two user levels: user and administrator.
Mobile Summary Page
  • View summary page on mobile devices - smartphones, tablets, etc.
  • Summary page lists all connected sensors' current values and alert statuses.
 

Diagram