Rugged 20.1" Military Panel Mount LCD Monitor MIL-S-901D (Model: AAP2000)
Rugged 20.1" Military Panel Mount LCD Monitor MIL-S-901D (Model: AAP2000)
aap2000
- Overview
- Specifications
- Download
Specifications |
Display |
|
Display Type: |
20.1" TFT Active Matrix LCD |
Active Display Area: |
359 x 287 mm (14.135" x 11.308") |
Pixel Pitch: |
0.28 x 0.28 mm |
Brightness: |
200 cd/m2 (Typical)
180 cd/m2 (Typ. w/EMI faceplate)
160 cd/m2 (Typ. w/Touch) |
Viewing Angle: |
± 85 ° All directions (Typical) |
Contrast Ratio: |
300:1 (Typical) |
Response Time: |
45 ms (Typical) |
Display Colors: |
16 Million |
Synchronization Range: |
Horizontal: 31.5 to 80 kHz
Vertical: 56 to 75 Hz |
Input Signal: |
VGA Input: |
Analog 0.7V p-p/75 Ohms |
Sync: |
Separate sync. TTL level
Horizontal Sync
Positive/Negative
Vertical Sync
Positive/Negative
Composite Sync
Positive/Negative
Sync on Green (Video 0.7Vp-p
and Sync 0.3Vp-p) |
Input Interface: |
HD-15 (VGA) & 5 BNCs |
Video Input Impedance: |
75 Ohms |
Resolutions Supported: |
640 x 480 @ 60-75 Hz
720 x 400 @ 70 Hz
800 x 600 @ 56-75 Hz
832 x 624 @ 75 Hz
1024 x 768 @ 60-75 Hz
1152 x 900 @ 66 Hz
1280 x 1024 @ 60-75 Hz |
Native Resolution: |
1280 x 1024 @ 60 Hz |
User Controls: |
|
Display Controls: |
Power, Brightness, Contrast,
Horizontal Width, Horizontal
Phase, Horizontal & Vertical
Position |
Environmental |
Temperature: |
Operating: (Sea Level) |
0°C to 50°C, MIL-STD810E
Method 501.3/502.3, Procedure II |
Storage: |
-30°C to +70°C, MIL-STD-810E,
Method 501.3/502.3, Procedure I |
Optional: |
-40°C storage available |
Humidity: |
Operating/Storage: |
5 to 95% RH Non–condensing
MIL-STD-810E, Method 507.3
Procedure 1 |
Altitude: |
Operating: |
0 to 42,000 ft. above sea level |
Storage: |
0 to 54,000 ft. above sea level
(MIL-STD-810E, Method 500.3) |
Rapid Decompression: |
RTCA/DO-160D, 8,000 ft ASL to
42,000 ft. ASL in 15 seconds,
42,000 ft. ASL to 25,000 ft. ASL in
5 minutes |
Shock: |
MIL-S-901D, Grade A, Class 1
Type A |
Vibration: |
MIL-STD-167-1, Type 1 |
Drip Proof: |
MIL-STD-810E, Method 506.3
Procedure II, Front Panel only |
Sand/Dust: |
MIL-STD-810E, Method 510.3,
Front Panel only |
EMI: |
MIL-STD-461D RE102, RS103,
CE101*, CE102, CS101 (*4420R5C
Only) |
Power Requirements: |
Power Supply: |
90-132/180-264 VAC Auto
Ranging (+28 VDC Optional) |
Frequency: |
47-440 Hz |
Power: |
60 watts typical |
Chassis Connector: |
IEC 320 |
Cable Connector: |
NEMA 5-15 P |
Dimensions & Weight: |
Rack Mount ARP920X |
Height: |
15.72" (9U) |
Width: |
19.00" |
Depth: |
3.95" * |
Weight: |
24 Lbs. |