IMS-4002: Sensaphone IMS-4000 Node (US/Canada)

IMS-4002: Sensaphone IMS-4000 Node (US/Canada)
  • Front View
  • Diagram

IMS-4002: Sensaphone IMS-4000 Node (US/Canada)

  • Overview
  • Specifications
  • Download

Product Overview

Extend your monitoring capability across multiple locations with the IMS-4000 Node. Each Node offers 64 more IP addresses, 8 more environmental sensors and additional power monitoring to your system. Each IMS-4000 Host can manage up to 31 Nodes, giving you the capacity to monitor 256 environmental elements, 2048 IP addresses and power in 32 separate locations.


  • Housed in a 9.6"w x 1.75"h x 7"d enclosure, which is 1 EIA rack-mount space high.
  • The sensor inputs are designed to interface with IMS-4000 series sensors (See Appendix C). The use of RJ-45 jacks for sensor inputs allows the use of existing structured cabling to connect remote sensors.
  • The Node unit comes with a built-in microphone. Directly below the built-in mic is a separate jack for connecting an optional condenser microphone to sense audible alarms, such as smoke detectors.
  • This jack is for connecting to your network so that the IMS-4000 Node can communicate with the IMS-4000 Host and ping selected network servers and/or services. Two LEDs indicate Link Status (left) and Receive Date status (right).
  • IThe RS-232 serial port is used to configure network settings. The port is DB9 male DTE and operates at 9600 baud, no parity, and 1 stop bit. A DB9 female¨Cfemale null modem cable is required to configure network settings.
  • The on/off switch connects main power and battery power to the system. In the event that main power fails, the backup battery system will automatically power the system.
  • The rear panel is where the main power cord exits the unit. A 120VAC/60Hz to 8VAC adapter provides main power to the unit.
  • The battery compartment is located below the top panel. Batteries are required to keep the unit running in the event of a power failure. The unit requires six (6) C-size 1.2V 2000mAHr Ni-Cad batteries (included). To remove or replace batteries, remove the top cover with a small flat-head screwdriver.
Node Operating Specifications
Temperature: 32¨C 122¡ã F
Humidity: 5-90% RH non-condensing
Power Supply: 120VAC 60Hz
Power Consumption: 10 Watts
Dimensions: 1.8" H x7" D x 9.6" W
Backup Battery: (6) C-Size 1.2V 2000 mAH Ni-Cad rechargeable
Backup Time: 3.5 Hours
Node Communications Specifications
Ethernet: 10Base-T, 10 Mbps
RS-232: DB9, 9600bps, DTE
Node Environmental Monitoring
Internal Monitoring: AC Power, Backup Battery Level, Sound Level (in dB)
Number of Sensor Ports: 8
Sensor Types: Temperature, Humidity, Water, Power, Infrared Motion, Smoke, Dry Contact
Sensor Input Connector: RJ-45
Sesnor Cables: CAT-5, 568B
Cable Length: 1000'
External Microphone: 3.5mm jack, electret condenser