Analog 2 Channel (1 Stereo) Self-Powered Speaker System with Professional Level Metering (AMP1A-30)

Electrical Distortion Less than 0.15% at any level below limit threshold
Acoustic Distortion: 8% or less wprst case frequencoes above 180Hz including cabinet resonance, typically < 2%

Specification
Analog Inputs	2 balanced analog inputs (XLR)
Output	loop-through of balanced analog input - XLR
Input connectors	XLR terminal connectors
Audio source type	analog
Analog input sampling rate	48 kHz
Analog input impedance	>40 kOhms
Peak acoustic output @ 2 feet	98dB SPL
Frequency response (1/6 octave)	80Hz - 20kHz (?5dB) (-10dB @ 50Hz, 22kHz)
Power output	RMS each side (2 Ohms) - 5W, 7W peak RMS dual WOOFER (4 Ohms) - 11W, 16W peak
Electrical distortion	<0.15% at any level below limit threshold
Acoustic distortion	8% or less worst case frequencies above 180Hz including cabinet resonance, typically <2%
Hum and noise	better than -68dB below full output
Level meters	two 30 segment large segment LED bargraphs
Standard scale	-49 to +16 dB
Midscale resolution	1 dB (Extended VU Scale)
Standard display ballistics	simultaneous VU & PPM (dot over bar)
Selectable display controls	better than -68dB below full output.?0? (zero) calibration: 0 dBu, +4 dBu, +6 dBu, +8 dBu floating segment: PPM 3s hold, PPM decay, VU peak 3s hold, VU peak 10s hold
Additional options	alternate scales, color mappings and features such as phase correlation or sum & difference may be specified at the time of ordering, contact us for details
Magnetic shielding	< 0.5 gauss any adjacent surface
Power consumption (AVG. MAX)	30W
Chassis Dimensions (HxWxD)	1.75 x 19 x 7.5" (44mm x 483mm x 190mm) *not including rear panel input connectors
Weight (approx.)	9 lbs (4kg)
Power supply	100 to 240VAC, 50/60Hz universal input CE and UL approved

PRODUCTS