| LCD Size | Resolution | Nits | Viewing Angle | Contrast Ratio | Maximum Power  Consumption | 
      
        | 17.5" TFT AM LCD | 1920 x 1080 | 700 nits | 160° (H) x 140° (V) | 700:1 | TBD | 
      
        | Technical Specifications | 
      
        | Display | 8-bit color,    16,777,216 colors | 
      
        | Dimming Ratio | 3000:1 | 
      
        | Video Inputs | (1) HDMI, (1) SMPTE    3G/HD/SD-SDI, (1) DVI-I, (3) RS170 | 
      
        | Video Outputs | (1) SMPTE    3G/HD/SD-SDI, (1) RS170 | 
      
        | Connector* | MIL-C Power | 
      
        | Housing | Milled AL, Black    Hard Anodized | 
      
        | Rackmounts | 9.0" LCD: 4U,    12.1" LCD: 6U, 14.1" LCD: 7U, 17.5" LCD: 8U | 
      
        | Wide    Range DC Power Input† | 10-36 VDC (12,24,28    VDC nominal) | 
      
        | Power Conditioning | Protected    against Internal Short Circuit, Load Dump, Over Voltage and Reverse Polarity | 
      
        | Environmental Specifications | 
      
        | IP Rating | IP68 Front Bezel,    IP65 Rear Housing | 
      
        | Operating    Temperature | -30°C to 70°C (22°F    to 158°F), -20°C (-4°F) with Touchscreen Option | 
      
        | Storage Temperature | -50°C to 80°C (-58°F    to 176°F) | 
      
        | Humidity | 0-100% | 
      
        | Altitude | 45,000 ft. | 
      
        | Military Specifications |  | 
      
        | MIL-STD-461 | EMI | MIL-STD-810 | Method 513;    Acceleration | 
      
        | MIL-STD-704 | Aircraft Power    Requirements | MIL-STD-810 | Method 514; Procedure I, II, V, VI;    General Vibration Category 14 - Aircraft; Category 20 - Ground Mobile | 
      
        | MIL-STD-810 | Method 500; Altitude | MIL-STD-810 | Method    516; Procedure I, Functional Shock | 
      
        | MIL-STD-810 | Method 501; High    Temperature | MIL-STD-810 | Method    520; Temp, Humidity, Vibe and Altitude | 
      
        | MIL-STD-810 | Method 502; Low    Temperature | MIL-STD-810 | Method 523;    Vibro-Acoustic/Temperature | 
      
        | MIL-STD-810 | Method    503; Temperature Shock | MIL-STD-1275 | Vehicle Power    Requirements | 
      
        | MIL-STD-810 | Method 505; Solar    Radiation | MIL-STD-1472 | Thermal Contact    Hazard | 
      
        | MIL-STD-810 | Method 506; Rain | MIL-STD-3009 | Optional NVIS    Compatibility | 
      
        | MIL-STD-810 | Method 507; Humidity | MIL-PRF-22885 | Sunlight Readability    for Push Buttons | 
      
        | MIL-STD-810 | Method 508; Fungus | MIL-A-8625 | Standard Finish | 
      
        | MIL-STD-810 | Method 509; Salt/Fog | MIL-PRF-22750F | Optional    Painted Finish - Min. Qty Required | 
      
        | MIL-STD-810 | Method    510; Blowing Sand and Dust | MIL-DTL-38999 | Connector (Qualifed) | 
      
        | MIL-STD-810 | Method    511; Explosive Atmosphere |  |  |