8.4" Panel PC Panel Mount Front IP65 JNF3A-J1900 / J1900 / RAM 4GB / HDD 500GB w/ Touch (Model: BLPC08400-J-V2)
8.4" Panel PC Panel Mount (with 3mm front bezel) Front IP65 JNF3A-J1900 / J1900 / RAM 4GB / HDD 500GB with Touch
BLPC08400-J-V2
- Overview
- Specifications
- Download
Display |
| LCD Size |
8.4" |
| Max Resolution |
800 x 600 pixels |
| Brightness (cd/m˛) |
350 cd/m˛(Typ.) |
| Contrast Ratio |
600:1 |
| LCD Color |
26.2K colors |
| Pixel Pitch (mm) |
0.213 x 0.213 |
| Touch Screen |
8.4" resistive |
|
| |
Motherboard |
| Form Factor |
|
| Dimensions |
-3.5" SBC (148* 102 mm) |
| Processor System |
| CPU |
- Intel Bay Trail Series SoC Processor, Default: N2930 |
| Core Number |
- by CPU |
| Max Speed |
- by CPU |
| L2 Cache |
- by CPU |
| Chipset |
-SoC |
| BIOS |
-AMI 64Mb Flash ROM |
| Expansion Slot |
|
| Mini-PCIe |
-1 (full size, shared with mSATA) + 1 (half size) |
| mSATA |
-1 (shared with full size Mini PCIe) |
| Memory |
| Technology |
- Single/Dual Channel DDR3L 1333MHz SDRAM (By CPU) |
| Max. |
-4GB/8GB |
| Socket |
-l*SO-DIMM |
| Graphics |
|
| Controller |
-Intel HD Graphics |
| VRAM |
- Shared Memory |
| LVDS |
-1 * 24-bits Dual CH |
| DVI-I |
-1 |
| Multi Display |
-Yes (Dual Displays) |
| Ethernet |
| Ethernet |
-10/100/1000 Mbps |
| Controller |
-RealtekRTL8111HGbE |
| Connector |
- 2 * RJ45 |
| SATA |
| Max Data Transfer Rate |
-1 * SATAN (3.0Gb/s) |
| Rear I/O |
| DVI-I |
-1 |
| Ethernet |
-2 |
| USB |
-4(3 * USB2.0 + 1* USB 3.0) |
| Audio |
-1 (Line -out) |
| DC-input |
-1 |
| Internal Connector |
| USB |
- 4 (4 x USB 2.0) |
| PS/2 |
-1 |
| LVDS/inverter |
-1 |
| Serial |
- 4 (3 * RS232, 1 * RS232/422/485 with 5V/12V selectable header) |
| SATA |
-1 * SATAN (3.0Gb/s) |
| mPCIe |
-1 (full size, shared with mSATA) + 1 (half size) |
| mSATA |
-1 (shared with mPCIe) |
| GPIO 8-bit |
- 4-in / 4-out |
| Chassis intrusion |
-1 |
| Audio Header |
-1 (Line-out & MIC) |
| Watchdog Timer |
|
| Output |
- From Super I/O to drag RESETCON# |
| Interval |
- 256 segments, 0,1,2...255sec/min |
|
| |
| Power Requirements |
| Input PWR |
- +9~24V DC-in (2-pin PWR Con) |
| Power On |
AT/ATX Supported
-AT: Directly PWR on as Power input ready
-ATX: Press Button to PWR on after Power input ready |
| Certifications |
| Certifications |
- CE, FCC, RoHS, REACH |
| Environment |
| Temperature |
-Operating: -20°C~60°C
-Storage: -40°C ~ 70°C
-Humidity: 10% ~ 90% RH @40°C (non-condensing) |
|
