SITEMAP Live Chat

24" IP65 Panel Mount Front Bezel LCD 1500nits, VGA+DVI+HDMI, -20~70C w/ PCAP Touch (Model: YPMW2400IPHB2WT-FPCAP)

6mm Aluminum front bezel / 24" / 1920x1080 / 1500nits LED / VGA+DVI+HDMI signal input / (10-points) PCAP Touch with USB controller / -20 to 70C / Panel Mount / VESA Mount/ IP65 Rated Dust and Water Proof Front.

6mm Aluminum front bezel / 24" / 1920x1080 / 1500nits LED / VGA+DVI+HDMI signal input / (10-points) PCAP Touch with USB controller / -20 to 70C / Panel Mount / VESA Mount/ IP65 Rated Dust and Water Proof Front.

Main Feature

    • Sunlight Readable.
    • 24" Full-HD TFT LCD with resolution up to 1920x1080.
    • Suitable for military, tablet, ruggedized PC, kiosk, advertising, POS, marline, transportation, gaming, gas pump.
Inquiry/Quote Request
YPMW2400IPHB2WT-FPCAP
  • Overview
  • Specifications
  • Download

Clamp Mount
 
 

Installation Guide for Panel Mount Product:
You better have at least 2 people to do the installation. One is at the front side of the mounting wall, another is at the back side of the mounting wall.
 
 
1. Get the Mechanical Drawing :
You can get the mechanical drawing of your product model from our web site : www.itechlcd.com . If you can't find the correct mechanical drawing, contact your local dealer.

2. Make the cut out :
There is the cut out dimension in the Mechanical Drawing. Make sure your cut out meet the cut out dimension requirement. If the cut out is too small, there will be some interference. If the cut out is too big, you can't have the panel
mounting securely. Please note that there is thickness limitation of the mounting wall for panel mount installation.

3. Prepare the accessory :
For panel mounting kit installation, you will receive mounting kits and screws together with your unit and you have to prepare the screw driver by yourself. There are at least 2 mounting kits for each side of the panel. The mounting kit and the screw is paired.

4. Installation :
4-1. Put the monitor in the cut out from the front side of the mounting wall. The best way to mount the panel is to align the bottom of the panel housing with the bottom edge of the cut out. This way can help hold the panel steadily.
 
 
4-2. At the back side of the mounting wall, insert the mounting kits into the slide hole at the side bracket on the panel.
4-3. Put the screw on the mounting kits and screw it tightly.
4-4. Finish all the mounting kits one by one then you can have a secure installation for your Panel Mount product.
 
Item Specification
Panel Type 24-inch TFT LCD
Screen Diagonal 24-inch
Active Display Area (mm) 531.36 (H) x 298.89(V)
Pixel Pitch (um) 276.75 (per one triad) x 276.75
Number of Pixels 1920 x 1080
Contrast Ratio 3000: 1
Color Arrangement R.G.B. Vertical Stripe
Brightness (cd/m˛) 1500 cd/m˛
Viewing Angle(Typ.) 89/89/89/89 (R/L/U/D)
Signal Connector VGA+DVI+HDMI
Power Source AC100 ~ 240V, Universal +/- 10%
Power Consumption 45(Typ)
Power Management VESA DPMS Compliant
Operating Temperature -20~ 70°C
Storage Temperature -20 ~ 60°C
Plug & Play VESA DDC 1/2B

PRODUCTS

Solutions

News Room

Resources

Quality Icon

High Quality Parts

i-Tech company uses only the best Industrial LCD and High Quality embedded Panel PC parts along with rugged components in USA or imported from Korea and Taiwan , for most reliable quality that you can trust!

Customer Services

Customer Service

i-Tech customer service reps are here to help you with your inquiry for Industrial monitors, panel pc, and outdoor LCD. From any general questions to technical support, we leave you feeling completely satisfied with our excellent LCD quality as well.

USA Icon

US Based Company

Most of i-Tech’s High Brightness LCD and Rugged Panel PC Products are assembled, tested and shipped from our very own factory in CA USA, giving us the ability to customize the systems to your needs.