15.6" 1920x1080, 400nits, IP67 (NEMA 6 Submersible) Rugged Military Monitor w/ MIL-STD (Model: DHFW1560)

15.6" Rugged Display, HDMI Input, DVI Input, HD-SDI Input, Composite Video Inputs (3), HD-SDI Output, Composite Video Output, LED Backlight, 15 User Programmable Buttons, FHD Resolution (1920 x 1080), IP67 Sealed, MIL-STD Design, 12-36Vdc Power Input

LCD SIZE	Resolution	Luminance	Viewing Angle	Contrast Ratio	Maximum Power Consumption
15.6" TFT AMLCD	1920x1080	400 nits	178° (H) x 178° (V)	1000:1	35 Watts
TECHNICAL SPECIFICATIONS
Display	8-bit color, 16,777,216 colors. TFT AMLCD (Thin-Film Transistor Active-Matrix Liquid-Crystal Display)
Dimming Ratio	1000:1
Video Inputs/Outputs	HDMI Input, DVI Input, HD-SDI Input, Composite Video Inputs (3), HD-SDI Output, Composite Video Output
Housing	Milled Aluminum, Black Hard Anodized
Mount Options	Panel, RAM, VESA (75mm); Quoted individually.
Wide Range DC Power Input	12-36 VDC (12, 24, 28 VDC nominal)
Power Conditioning	Protected against Internal Short Circuit, Load Dump, Over Voltage and Reverse Polarity
ENVIRONMENTAL SPECIFCATIONS
IP Rating	IP67 (NEMA 6 Submersible)
Operating Temperature	-46°C to 71°C (-51°F to 160°F); -20°C (-4°F) with Touch Option
Storage Temperature	-54°C to 71°C (-65°F to 160°F)
Humidity and Altitude	0-100%; 45,000 ft.

MILITARY SPECIFICATIONS
MIL-STD-461	EMI	MIL-STD-810	Method 512; Immersion
MIL-STD-704	Aircraft Power Requirements	MIL-STD-810	Method 513; Acceleration
MIL-STD-810	Method 500, Altitude	MIL-STD-810	Method 514; Procedure I, II, V, VI; General Vibration
MIL-STD-810	Method 501; I & II; High Temperature	MIL-STD-810	Method 516; Procedure I, Functional Shock
MIL-STD-810	Method 502; I & II; Low Temperature	MIL-STD-810	Method 520; Temp, Humidity, Vibe and Altitude
MIL-STD-810	Method 503; Temperature Shock	MIL-STD-1275	Vehicle Power Requirements
MIL-STD-810	Method 505; Solar Radiation	MIL-STD-1472	Thermal Contact Hazard
MIL-STD-810	Method 506; Rain	MIL-STD-3009	NVIS Compatible (Optional)
MIL-STD-810	Method 507; Humidity	MIL-PRF-22885	Sunlight Readability for Push Buttons
MIL-STD-810	Method 508; Fungus	MIL-A-8625	Standard Finish, Type III, Class 1 & 2
MIL-STD-810	Method 509; Salt/Fog	MIL-PRF-22750	Painted Finish, Optional, Minimum Quantity Required
MIL-STD-810	Method 510; Blowing Sand and Dust	MIL-DTL-26482	Connector, Qualified
MIL-STD-810	Method 511; Explosive Atmosphere	MIL-DTL-38999	Connector, Qualified