10.1" IP65/NEMA4 Wide Temp Panel Mount (Aluminum-6mm) 1024*600, open frame, 1000nit, 500:1, 70/70/70/50 (R/L/U/D) LED, VGA + DVI Input, Front OSD, including rear Clamp mount (Model: YPMW1010PHB-PCT)

Main Feature

- 10.1" VGA TFT LCD with resolution 1024x600
- Suitable for military, tablet, ruggedized PC, kiosk, advertising, POS, marline, transportation, gaming, gas pump.
- Panel Mount (Aluminum-6mm)

Overview
Specifications
Download
Contact Sales

Clamp Mount

Order Information

Touch Screen (Optional)
N: No touch screen or glass.
G: Glass (AR Coating).
R: 5-Wires Resistive, RS232.
U: 5-Wires Resistive, USB
A: 3M Microtouch capacitive, RS232.
B: 3M Microtouch capacitive, USB.

Signal Input
C: VGA only.
D: VGA + DVI-D.
E: VGA + DVI-D + Audio.
J: VGA + DVI-I + Audio
HDMI

Color
B: Black
S: Sliver

Other
N: N/A
P: Panel mount kits.

Installation Guide for Panel Mount Product:

You better have at least 2 people to do the installation. One is at the front side of the mounting wall, another is at the back side of the mounting wall.

1. Get the Mechanical Drawing :
You can get the mechanical drawing of your product model from our web site : www.itechlcd.com . If you can't find the correct mechanical drawing, contact your local dealer.

2. Make the cut out :
There is the cut out dimension in the Mechanical Drawing. Make sure your cut out meet the cut out dimension requirement. If the cut out is too small, there will be some interference. If the cut out is too big, you can't have the panel
mounting securely. Please note that there is thickness limitation of the mounting wall for panel mount installation.

3. Prepare the accessory :
For panel mounting kit installation, you will receive mounting kits and screws together with your unit and you have to prepare the screw driver by yourself. There are at least 2 mounting kits for each side of the panel. The mounting kit and the screw is paired.

4. Installation :
4-1. Put the monitor in the cut out from the front side of the mounting wall. The best way to mount the panel is to align the bottom of the panel housing with the bottom edge of the cut out. This way can help hold the panel steadily.

4-2. At the back side of the mounting wall, insert the mounting kits into the slide hole at the side bracket on the panel.
4-3. Put the screw on the mounting kits and screw it tightly.
4-4. Finish all the mounting kits one by one then you can have a secure installation for your Panel Mount product.

System Specifications
Display Type	10.1" TFT-LCD
Panel
Display Color	262K/16.2M colors
Brightness (cd/m²)	1000nits
Display Resolution (pixel)	VGA(1024 x 600)
Viewing Angles (CR≥10)	70/70/50/50
Contrast Ratio	500 : 1
Backlight Unit	LED
Response Time (msec)	35ms
Environmental
Temperature
Operation	-10°C~70°C
Storage	-20°C~60°C
Touch	Integrated PCAP with USB Controller Dual touch for Window 7

Data Sheet

Sales Inquiry
	Sales Phone:	888-483-2418/Press 2 510-226-9226/Press 2

	Email:	sales@itechlcd.com

10.1" IP65/NEMA4 Wide Temp Panel Mount (Aluminum-6mm) 1024*600, open frame, 1000nit, 500:1, 70/70/70/50 (R/L/U/D) LED, VGA + DVI Input, Front OSD, including rear Clamp mount (Model: YPMW1010PHB-PCT)