E-MON-M

2RU Utility Monitor with Dolby and HD/SD-SDI (Model:E MON-1/M)

2RU Utility Monitor with Dolby and HD/SD-SDI (Model:E MON-1/M)

E-MON-M
  • Overview
  • Specifications

The E MON-1/M unit is a powered eight channel audio monitor and is designed specifically for decoding, processing, and monitoring Dolby E, Dolby Digital, HD-SDI, SD-SDI, and AES/EBU audio signals, in the rack.

The unit is 2RU in size, for excellent fidelity without using excessive rack space in the critical "operating zone" of rack bays and consoles.

The eight, high resolution LED bargraphs offer superior visibility and accuracy of audio levels and the front panel LCD display provides Mode and Audio Select information at a glance.

The speakers and amplifiers are arranged in the popular Wohler bi-amp summed bass stereo configuration: bass frequencies from all selected channels are summed into a 20 Watt amplifier, which drives the woofer.

The two side channel amplifiers and speakers reproduce, in stereo, only the mid- and high-frequencies. Note that the middle speaker (the woofer) is NOT a dedicated Center nor LFE speaker.

There is also a headphone output, which mutes the speakers while in use. Eight wide-range high resolution LED bargraph level meters are provided for all eight channels for accurate metering. Fifty three bicolor segments simultaneously display signal levels according to PPM and VU standards.

Specifications:
 
Rack Height: 2RU
Weight: 18.0 LBS (8.2 KG)
Dimensions: 3.5X19X12" (89X483X305MM)
Power Consumption: 60W
Signals Monitored: AES/EBU;HD/SD-SDI;AC-3;DOLBY E
Analog Inputs: SEE DOLBY INPUTS
Analog Outputs: 2 ANALOG OUTPUTS FROM SELECTED SOURCE OR MULTI-CHANNEL DOWNMIX ON XLR
AES/EBU Inputs: 1 UNBALANCED AES INPUT ON XLR FOR DEOLBY E, DOLBY DIGITAL OR STANDARD LINEAR PCM (AES) SIGNALS; 1 BA
AES/EBU Input Termination: 110 OHMS BALANCED; 75 OHMS UNBALANCED
SDI Inputs: 1 HD/SD-SDI INPUT ON BNC
SDI Input Termination: 110 OHMS BALANCED; 75 OHMS UNBALANCED
SDI Outputs: 1 HD/SD-SDI RECLOCKED OUTPUT ON BNC
Dolby Inputs: 1 BALANCED DOLBY DIGITAL OR PCM INPUT ON XLR; 1 UNBALANCED DOLBY DIGITAL OR PCM INPUT ON BNC
Level Meters: 8 X 53 SEGMENTS (VERTICAL)
Level Meter Scale: 65 DB (0 TO -66 DB FACTORY DEFAULT FOR EXTENDED VU SCALE)
Level Meter Dynamics: SIMULTANEOUS VU & PPM
Level Meter Resolution: 1 DB
Aural Sound Outputs: HEADPHONE OUT;L/R/WOOFER SPEAKERS
Acoustic Distortion: 6% OR LESS WORST CASE FREQUENCIES ABOVE 140 HZ INCLUDING CABINET RESONANCE, TYPICALLY < 1.5%
Electrical Distortion: <0.1% AT ANY LEVEL BELOW LIMIT THRESHOLD
Frequency Response (1/6 octave): 80 HZ - 16 KHZ (+ OR -5 DB); (-10 DB @ 40 HZ, 20 KHZ)
Peak Acoustic Output @ 2 feet: 104 DB SPL
Hum and Noise: BETTER THAN -68 DB BELOW FULL OUTPUT