Supports resolution up to WUXGA (1920x1200@60Hz), Transmission distance up to 1,000 feet, Wall Mount / DIN-RAIL Mount (Model: AVT-1000).

Overview

The AVT-1000 VGA & RS-232 over CAT5 Extender with RGB Delay Control has been tested for conformance to safety regulations and requirements, and has been certified for international use. However, like all electronic equipments, the AVT-1000 should be used with care. Please read and follow the safety instructions to protect yourself from possible injury and to minimize the risk of damage to the unit.

Technical

Role of usage	Remote Receiver	Local Transmitter
Video bandwidth Video support Transmission Audio support RS-232 signal type Input video signal Equalization RGB delay control Loop-out ESD protection PCB stack-up	350MHz VESA WUXGA(1920x1200) 330m (1,000ft) (CAT5e) No Half-duplex & baud rate 1.2 Volts ( peak to peak ) Continuous analog control Yes 1 VGA loop-out [1] Human body model-±15kV(air-gap discharge) & ±8kV (contact discharge), [2]Core chipset ±8kV 4-layer board(impedance control - differential 100Ohm; single 50Ohm)
Input Output	1x RS- 232 1x VGA, 1x RS- 232	1x VGA, 1x RS- 232 1x VGA, 1x RJ-45
VGA connector RJ-45 connector RS-232 connector	HD-15 (15-pin D-sub female) WE/SS 8P8C with 2 LED indicators DE-9 (9-pin D-sub female)

Environmental

Dimensions (L x W x H) Net Weight	6.19 x 4.5 x 1.35 inch / 157.2 x 114.3 x 34.3 mm 2.33 lbs / 1.06 kg	6.19 x 4.26 x 1.35 inch / 157.2 x 108.4 x 34.3 mm 2.33 lbs / 1.06 kg
Mounting Power Requirement Power Consumption Operating Temp Storage Temp Relative Humidity	Wall Mount / DIN-RAIL Mount 5V / 2A DC (Max) 5 W(Max) 0~50°C (32~122°F) -20~60°C (-4~140°F) 20~90% RH (no condensation)