3 Megapixel 21.3" Color LCD for diagnostic imaging realizes advanced grayscale display (Model: CCL354i2)

3 Megapixel 21.3" Color LCD for diagnostic imaging realizes advanced grayscale display  (Model: CCL354i2)

3 Megapixel 21.3" Color LCD for diagnostic imaging realizes advanced grayscale display (Model: CCL354i2)

  • Overview
  • Download
High-Luminance 3MP color display for diagnostic imaging realizes advanced grayscale display
With high luminance and high contrast, and an integrated color calibration function, our CCL354i2 delivers highly accurate color reproduction faithful to the DICOM GSDF. The CCL354i2 includes a luminance compensation feature for edge to edge consistency, is fully configurable for multi-display applications, and comes standard with hardware-based pivot functionality for fast image drawing in portrait orientation


New luminance stabilizing system λ-Sentinel II
λ-Sentinel II consists of a luminance sensor and luminance control circuit. The luminance sensor, integrated into the front bezel, consistently monitors and accurately stabilizes luminance on the screen by rapidly communicating with the backlight sensor.

Remote grayscale check and remote calibration functions
Conformance testing to DICOM GSDF and calibration can be remotely accomplished. These features minimize the burden on display administrators. * An optional PM Medivisor software is required.

Luminance equalizer λ-Uniformity Congruence
Is built in to achieve highly accurate luminance uniformity across the screen. Luminance unevenness is minimized in the final tune-up prior to shipping. * Images shown are for illustrative purposes only.

High luminance, high quality LCD panel
800 cd/m² and contrast ratio of 750:1. Due to its wide, dynamic range, high quality grayscale can also be achieved on this color display, providing versatility for multi-modality workstations.

Accurate color and grayscale reproduction compliant with DICOM Part 14
By calibrating color temperature, luminance, and gamma characteristics, reproduction of colors faithful to the original and smooth display of grayscale are possible.

Built-in 10-bit LUT (look up table) for accurate grayscale reproduction
The built-in LUT selects the most appropriate 256 shades of gray (8bit) out of 1021 shades (10bit) to realize finer and smoother grayscale.

Hardware pivot function for fast drawing in portrait orientation
Stress-free operation is made possible by fast drawing speed for on-the-fly change to portrait

Dual Link input
provides smooth display of motion pictures.

OSD Information Display
Such information as the display model, total operating time, actual measurement of luminance, and calibration settings can be checked on screen.

LED indicator to inform of current status
A glance at the LED indicator tells you the display's current operating status.

Enhanced convenience with utility software :
The backlight dims as the screensaver starts, reducing power consumption and preventing unnecessary deterioration of the backlight. * This feature may not be available, depending on the specifications of the graphics card used. Gamma check 18 points of luminance values are measured and plotted into a graph. Ambient light and display luminance measurement The built-in sensors measure display luminance and ambient illuminance

Worldwide medical safety standards
This display is certified under various medical safety standards that are much more demanding than those for general-purpose IT equipment.


Model name CCL354i2
LCD Technology 21.3-inch, Color, TFT active matrix
Display Area 433.152mm x 324.864mm
Pixel Pitch 0.2115mm x 0.2115mm
Visual Perfomance Contrast Ratio 750:1 (typ)
Maximum Luminance 800cd/m²(typ), (calibrated to 410cd/m² and 300cd/m² by factory default)
Viewing Angle 170
Available Resolution USTEXT, 640 x 480 (VGA), 800 x 600 (SVGA), 1024 x 768 (XGA), 2048 x 1536 (QXGA)
Color Display Full color (16.77 million colors)
Input Signal Input Sync Signal DVI 1.0 compliant
Plug and Play DDC2B compliant
Input Power Supply Input AC Adapter 100V-240V (
Maximum Power Consumption 120W (typ), (with power management feature)
Features Calibration Control Luminance, Gamma, Color temp., Capability to save 3 sets of LUT settings (A calibration kit is required.)
OSD Information Display Model name, Serial No., Total operating time, Calibration settings (Operating time since the last calibration, Luminance, Gamma, Color temp., etc.), Current luminance, etc.
USB Hub USB Rev. 2.0 compliant, 1 USB upstream connector, 2 USB downstream connectors
Other Features Luminance Uniformity Correction, Hardware pivot, LED indicator
Standards UL60601-1, CSA C22.2 No. 601.1, MDD/CE, FCC-B, VCCI-B,FDA510(k)
Physical Characteristics Dimensions (WxHxD) Landscape: 474mm x 468.4/529.9mm x 220mm Portrait: 367mm x 521.9/583.4mm x 220mm
Weight Approx. 11.5kg (Approx. 7.3kg without tilt stand)
Tilt Stand Tilt, swivel, landscape/portrait rotation
Mount 100mm VESA compliant
Security Slot On the back of the panel and the tilt stand
Accessories AC adapter, 3P power cord, DVI cable, USB cable, User manual