AMP1-V2DA

1RU 4 Channels Summing Monitors (Model: AMP1-V2DA)

1RU 4 Channels Summing Monitors (Model: AMP1-V2DA)

AMP1-V2DA
  • Overview
  • Specifications

The AMP1-V2DA audio monitor provides self-powered, full-fidelity stereo monitoring in the smallest rack space possible (1U).

The unit features two AES inputs and loop-through outputs on BNC connectors, four analog inputs on balanced Phoenix connectors, four analog outputs (converted from the AES source) on Phoenix connectors, AES source select switch, and four high-resolution 26-segment tri-color LED bargraph level meters.

Two banks of four buttons on the front panel are used to independently assign from one to four (summed) channels to each of the two (left and right) speaker channels.

A pair of balanced XLR connectors output the selected audio source for connection to downstream equipment.

The level meters may be adjusted for a number of parameters, including Display Mode, Peak Hold, PPM Ballistics, Alternate Scales, and Phase Correlation via rear panel and internal DIP switches. An Auto Line Level Calibrate feature is also available.

The audio amplifier section features five high performance transducers driven by three power amplifiers: two amplifier/driver combinations handle midrange and high frequency information in stereo (left and right speakers), while the third center channel reproduces information below the 500 Hz crossover point (woofer speaker).

Output limiter circuits are incorporated to protect the speakers, and extensive magnetic shielding allows placement immediately adjacent to magnetically sensitive equipment, such as video monitors.

The unit front panel also features two AES status LEDs, Wohler's' proprietary three-LED stereo phase indication feature, volume control, balance pot, power indication LED, and stereo headphone output.

Specifications:
 
Rack Height: 1RU
Weight: 10.0 LBS (4.5 KG)
Dimensions: 1.75X19X12" (44.5X483X305MM)
Power Consumption: 35W
Signals Monitored: ANALOG;AES/EBU
Analog Inputs: 4 BALANCED ANALOG INPUTS ON PHOENIX
Analog Outputs: 2 BALANCED ANALOG SUMMED OUTPUTS ON XLR; 4 BALANCED ANALOG OUTPUTS FROM AES ON PHOENIX
AES/EBU Inputs: 2 UNBALANCED AES INPUT PAIRS ON BNC
AES/EBU Input Termination: 75 OHMS UNBALANCED
AES/EBU Input Sampling Rate: 32-48 KHZ, AUTO-DETECTING
AES/EBU Outputs: 2 UNBALANCED AES LOOP-THROUGH OUTPUT PAIRS ON BNC
Level Meters: 4 X 26 SEGMENTS (VERTICAL)
Level Meter Scale: +12 TO -50 DB
Level Meter Threshold: 0, +4, +6, +8 DBV(='0'), DIP SELECTABLE; FACTORY SETTING IS +4 D
Level Meter Dynamics: SIMULTANEOUS VU & PPM
Level Meter Resolution: 2 DB
Aural Sound Outputs: WOHLER SPEAKER SYSTEM;HEADPHONE, MUTES SPEAKERS
Acoustic Distortion: 8% OR LESS AT WORST CASE FREQUENCIES ABOVE 180 HZ INCLUDING CABINET RESONANCE, TYPICALLY < 2%
Electrical Distortion: <0.15% AT ANY LEVEL BELOW LIMIT THRESHOLD
Frequency Response (1/6 octave): 80 HZ - 16 KHZ (+ OR -7 DB); (-10 DB @ 50 HZ, 22 KHZ)
Peak Acoustic Output @ 2 feet: 98 DB SPL
Hum and Noise: BETTER THAN -68 DB BELOW FULL OUTPUT
Other Features (1): ALTERNATE SCALES, COLOR MAPPINGS AND FEATURES SUCH AS PHASE CORRELATION OR SUM & DIFFERENCE MAY BE S