12.1" High Brightness 1600 nits LCD kit with LED Backlight (Model: LOPH121SN-Kit-LED)

Overview
Download

The LOPH121SN-Kit-LED is a 12.1" sunlight readable LCD module. The module consists of an AUO G121SN01 TFT color LCD panel and a VHB (very high brightness) LED backlight. At the full brightness setting, the LCD screen luminance can reach about 1,600 Cd/m2 (nits). At this level, the total backlight power consumption is only 12Watts, which is about half the power required of a CCFL backlight at the same screen brightness.

With 1,600 nits screen brightness, the display is highly readable under bright ambient lighting, including direct outdoor sunlight. Also, the AUO G121SN01 is an industrial LCD with a wide operating temperature range, from -10 to +65oC, making this LCD module specifically suitable for demanding outdoor applications.

Specifications:

Parameters	Typical Value	Units	Conditions

LCD Screen Luminance	1,600	Cd/m2	LCD in OFF state (normally White)
Luminance Uniformity	20% or better		(Note 3)
Backlight Power Consumption	12	Watts	Total power to the LED driver board
Screen Luminance Dimming Ratio	20:1		With LD200 LED driver board
Typical LCD Contrast Ratio	500:1		White vs. Black (measured in the dark along the normal direction)
Typical Viewing Angles
3:00 directions	70	Degrees	Contrast ratio ≥ 10
9:00 directions	70	Degrees	Contrast ratio ≥ 10
6:00 direction	60	Degrees	Contrast ratio ≥ 10
12:00 direction	60	Degrees	Contrast ratio ≥ 10
LCD Screen Chromaticity (x, y)
White	(0.288, 0.307)		Measured at the normal direction
Red	(0.587, 0.377)		Measured at the normal direction
Green	(0.319, 0.593)		Measured at the normal direction
Blue	(0.144, 0.093)		Measured at the normal direction
Response Speed
Rise time	28	msec	White to Black, 10% - 90% transition
Rise time + Fall time	25	msec	Black to White, 10% - 90% transition
LCD Module Weight	580	Grams

Note 1: Please refer to AUO G0121SN01 LCD Specification for detailed electrical specifications and general precautions.
Note 2: All data is measured at 25o C ן�½ 2oC ambient temperature.
Note 3: Uniformity = (Lmax - Lmin) / (Lmax + Lmin) where Lmax (Lmin) is the maximum (minimum) luminance measured using a 10
mm diameter meter aperture over the LCD active area, except the last 10 mm area from the edges.

Data Sheet

12.1" High Brightness 1600 nits LCD kit with LED Backlight (Model: LOPH121SN-Kit-LED)