21-1210

12.1" Daylight Glass Bridge Display - LED, 750 Nits (Separate OSD control/Flush Mount) (Model: 21-1210)

12.1" Daylight Glass Bridge Display - LED, 750 Nits (Separate OSD control/Flush Mount) (Model: 21-1210)

21-1210
  • Overview
  • Specifications
  • Download

Glass Bridge Displays® offer the largest display in the smallest housing. Minimizing overall dimensions which enables multiple displays to be mounted and maximizing available space. 

The TFT LCD’s used in the Glass Bridge Displays® range from 12.1” through to 21.3” in either Daylight or Sunlight readable variants.

Each display is fitted with interface circuits that allow it to be connected with up to ten (10) inputs ranging from standard PC graphics cards, S-Video, Component & Composite Video sources. The display can accept signals of lower resolution, such as VGA. These signals are scaled so that they are displayed full screen.

Along with conventional LCD brightness and contrast controls, the display has an advanced dynamic brightness dimming technique, permitting full brightness to “Dim to Red” selectable at any brightness which is typically employed during night-time operation at low backlight levels.

A unique but simple remote On Screen Display (OSD) user interface known as the GB Commander allows the user to adjust a wide variety of display parameters if necessary. Once the parameters are set they are stored in non-volatile EEPROM. This ensures that the set-up is retained after power is switched off. Furthermore, simultaneous control of backlight brightness for up to ten (10) Nauticomp Glass Bridge Displays®can be achieved via one (1) GB Commander. This is accomplished by connecting up to ten (10) USB cables from the displays into one (1) PC. The Nauticomp Multi-Dim software to link these is available upon request. All Displays are designed for operation from an external regulated 12.1V DC supply. Nauticomp offers a wide range of external power supplies to match the power consumption requirements of individual applications – 12V DC, 24V DC & 110/230V AC. Each Nauticomp Glass Bridge Display® is shipped with a 3 Year Limited Warranty 100% parts and labour.     

Product Features

  • Industry's largest display in the smallest chassis frame
  • Unique multifunctional external Commander Controller
  • User interface with 10 selectable inputs
  • Custom nameable inputs
  • Dim to Red at any level in all sources
  • Dims to 2cd/m2 (approx) for night use
  • Regulated 12/24 V DC or 115/230 V AC inputs
  • Display sealed to IP67 standards front and back
  • Optically enhanced bonded glass
  • Rugged baked on powder coated chassis
  • 3 Year Limited Warranty
Electrical Description
 
Display Characteristics:
Type: 12.1” Active Matrix TFT
Dot Number: 1024 x 768 Pixels
Dot Pitch: 0.240mm
Response Time: 23ms Average- Typical
Contrast Ratio: 700:1 Min.
Brightness / Light Intensity: Enhanced to 750cd/m˛ (Nits)- Typical
Viewing Angles (at CR>10): 80o Left/Right, 80o Up & 80o Down
Backlight Life: 50,000 Hours- Typical
Colour Depth: 16.7 Million (Depending on Graphics Card)
Dimming Circuit:
Range: Full on to 0.5 cd/m˛ (Nits)- Approx. w/Red
DVI-I Input:  
Analog Interface: 330 MHz Max. Analog Bandwidth
0.5V to 1.0V Analog Input Range
Sync-on-Green (-ve) 0.3V
Digital Interface: DVI 1.0 Compatible Interface
108 MHz Operation
Synchronisation Range:
Horizontal Scan: 31 - 80 kHz*
Vertical Scan: 56 - 85 Hz*
*Depending on resolution  
Resolutions:
VESA Support for: 1280 X 1024 SXGA
1024 x 768 XGA*
800 x 600 SVGA
640 x 480 VGA
*Recommended for optimised resolution...
Active Display Area:
Active Display Area: 246.06 mm x 184.94 mm
Composite Video Input: PAL, NTSC & SECAM with ‘Picture In
Picture’ PIP Facility
Input Voltage:
DC Input: 12.1V DC Regulated
Via External Power Supply - Refer to ordering codes...
Power Consumption: 1.25 A (15 W) Max.
Environmental:
*Operating Temp: -4 to +158°F / -20 to +70°C
Storage Temp: -13 to +167°F / -25 to +75°C
Operating Humidity: 30% to 90% (Non-Condensing)
Storage Humidity: 10% to 90% (Non-Condensing)
Shock: 10g, 11msec ˝ Sine Wave
Vibration: +/-1mm, 2 to 13Hz: 0.7g 13 to 100 Hz

Mechanical Description
 
Construction:
Finish: Black Fine Textured Semi Gloss Powder
Coat
Housing: Preformed Aluminium
Sealing: Waterproof NEMA 6 / IP67
Toughened Safety Glass : Bonded, Contrast Enhancing, Optically
Coated and Polarized
Ventilation: Convection
Mounting Style:
Console/Flush Mount: Via Adjustable Fixing Brackets Which
Locate in Machined Slots Positioned
Around the Housing
Panel Cut-Out Size (mm): 11 19/64” (286.94) x 8 57/64” (225.82)
Dimensions:
Display (mm): 11 5/8” (295.28) W x 9 3/16” (233.36) H x 3 15/16” (100.01) D
Weight:
Weight (kg): 6.5 lbs. (2.9)
Input Connectors:
2x RGB Signal: DVI-I Female (Via 15-pin Converter)
2x DVI Signal: DVI-I Female (Combined with RGB)
3x Composite Signal: 7-pin Male Circular
1x Component Signal: 7-pin Male Circular
2x S-Video Signal: S-Video Socket
USB Connection: USB Type B Male (Proprietary Network)
GB Commander: 10-pin Male Circular
Power: 2-pin Male Circular
Each display is shipped with a set of interface cables. complete with 1 connector per
cable rated @ NEMA 6 / IP67...
Menu Controls:
Via Remote GB Commander: OSD Picture Features:-
Size, Position, Colour & PIP
Approvals / Warranty
Compliance: CE: IEC60945 / CISPR22 / EN 55022
FCC: Part 15 Section 15.109
Limited Warranty: 3 Year
Ordering Codes
Standard Configuration:  
12.1” Daylight Display: 21-1210
Please specify an external power supply from list below...
External Power Supply:
115/230V AC: 00-0301
12V DC: 00-0302
24V DC: 00-0303
Shipping Details:
Carton Size (cm): 2 1 ” ( 5 3 ) W x 20” (51) H x 10” (25) D
Weight (kg): 26 lbs. (12)