AMD 17" Rugged Transflective NEMA4 Sun Light Readable Marine LCD 510 Nits Display with Fanless PC Computer. Optional TouchScreen (Model: WMARC1700A2-A)

AMD 17" Rugged Transflective NEMA4 Sun Light Readable Marine LCD 510 Nits Display with Fanless PC Computer. Optional TouchScreen (Model: WMARC1700A2-A)

AMD 17" Rugged Transflective NEMA4 Sun Light Readable Marine LCD 510 Nits Display with Fanless PC Computer. Optional TouchScreen (Model: WMARC1700A2-A)

WMARC1700A2-A
  • Overview
  • Download

Features
  • AMD LX800 500 MHz CPU, Fanless Design
  • Dimming knob control backlight brightness from nearly 0% to 100%

  • Transflective film technology enhance visibility

  • Panel (flush) mount IP65 aluminum housing with powder coating design (IP54 rear)

  • 8 to 36V DC to DC power input acceptable

  • High quality touchscreen / AR protection glass for option

  • Ease of use front panel OSD control
  • Enhanced shock and vibration resistance
  • TFT Characteristics
    Pixel Number 1280x1024
    Pixel Pitch (RGB) 0.264 (H) x 0.264 (V)
    Contrast Ratio 500 : 1(typ.)
    Light Intensity 510 (typ.)**
    Viewing Angles -70~70 (H); -60~70 (V)
    Active Display Area 337.920 (H) x 270.336 (V)
    Max Colors 16.2M (6bits+FRC)
    SBC Specifications
    Processor AMD Geode LX-800 500MHz CPU
    BIOS Award 4Mbit Flash
    System Chipset AMD CS5536 Companion Device
    Memory Slot 1 x SODIMM, Default 512MB
    Graphic Chipset AMD Geode LX800 Integrated (64MB shared)
    IDE 1 x IDE(UDMA33)
    IDE 1 x Type I/II CF Socket
    KB / Mouse 1 x PS/2
    Ethernet 1x RJ-45(Realtek RTL8110s 10/100 Mbps)
    VGA 1x VGA Connector
    Audio Build in AC97 Codec
    USB Ports 4 x USB2.0
    Serial Ports 3 x RS232, 1 x RS232/422/485*
    Hard Drive 2.5" 40GB HDD
    Expansion slot 1x Mini PCI
    Power Specifications
    Power Supply Options 8 to 36 V DC to DC power supply with terminal block
    Power Consumption 26 W typical, normal operation
    Environmental Considerations
    Operating Temperature -10 to 55 deg.C (-20 to 60 deg.C for optional heating)
    Operating Humidity 5% to 95% (non condensing)
    Anti-Vibration 5Hz~500Hz / 1Grms/3 Axis
    Anti Shock 15G, 11ms duraiton
    Input / Output Connectors
    Ethernet LAN 1 x RJ45-10/100 Mbps
    Keyboard / Mouse 1 x PS/2
    COM 2 x RS232, 1 x RS232/422/485*
    USB 2 x USB Type-A receptable
    RGB Out 1 x VGA 15P DSUB (female)
    Compact Flash Socket 1 x Type I/II CF Socket (Not support Pull and Plug.)
    Power Input 1 x DC Terninal block (AC power Std IEC Inlet for optional)
    Available Options
    Mechanical Options Panel (Flush) mount with IP65 (SAW touch for IP54)
    Touch Screen Options SAW, 5 Wire Resistive
    AR Safety Glass Option 3mm Anti-reflective protection glass
    VESA Mounting NO(VESA is only by special request)
    Certification and Approvals
    Certification CE, FCC
    Approvals DNV Type Approval (Pending)
    *Due to Panel material's deviation, different panel supplier will set different specific variance range to optical characteristics. The factors of time used, Lamp current, Ambient temperature will influence the optical measurements.
    *If you use SBC on-board RS485, you need to set appropriate state of RTS line before sending/receiving data in your software program.We offer additional board that can perform auto-direction hardware function.
    **pls refer to Transflective product line for further brightness information