 |
|
RSM-8R4
Secure Console Manager + Power Switch |
IT Branch Office Remote Site Manager
Ideal for branch office applications, the RSM-8R4 provides security, accessibility and control of critical network equipment or any device with a console or maintenance port.
The RSM-8R4 allows you to remotely access multiple console ports using a single secure IP, switch power on/off/reboot on specific outlets, receive temperature alarms when user defined thresholds are breached, change configuration parameters and assign user access to ports and plugs all in a 1U device.
|
|
|
Security - SSHv2 Encryption, SSL Web Browser, IP Security Masks, 4 Levels of User Control
Access - 10/100 Ethernet, Built-In Web Browser, Out-of-Band via Internal Modem or Local Terminal
Control - Switch Individual Outlet Power On/Off/Reboot, Set Temperature Threshold Alarms
|
Intelligent Port Selection
Each of the RSM-8R4's RS232 serial ports can be individually accessed by number, name, or group via SSH or Telnet sessions. The RSM-8R4 also allows direct connections using TCP port assignments. Each serial port can be separately configured using simple menu driven commands to set the port password, data rates, flow control and other operating parameters.
The full matrix capability of the RSM-8R4 allows you to easily connect any two ports on the switch, even when the ports are using different communications settings. Ports can also be connected or disconnected by a third party with supervisor rights, and system managers can swap various RS232 devices between ports at a remote location.
Security
and Co-Location Features
Secure Shell (SSHv2) encryption and address-specific IP security masks prevent unauthorized access to command and configuration functions. The RSM-8R4 also provides four different levels of user security; the Administrator, Supervisor, User and View Only level. The Administrator level, which is intended for use by system managers and other administrators, provides complete access to all port connection / disconnection functions, operating features and configuration menus, and also allows access to any port on the switch. The User level is ideal for co-location applications, since users are only permitted to view status and connect to the ports allowed by their user name and password.
Capture
Buffer
"Buffer Mode" allows individual ports to capture and store incoming data, such as error and status messages received from attached console ports. This "snapshot" of the last data received is stored in memory, and can be viewed, saved or erased by the system operator at any time. Console messages can be stored in the RSM-8R4 port buffers, and sent to a remote location via SYSLOG, or an SNMP message can be generated to alert administrators when new console messages are received.
|
Features:
- SSHv2 Encryption
- HTTPS/SSL Secure Web
- Secure Authentication: LDAP/Kerberos/RADIUS/TACACS+
- SNMP Control
- (8) RS232 RJ45 Serial Ports
- (4) Power Receptacles
- 10/100Base-T Ethernet Port
- Internal 56K v.92 Modem with Dial-Back Security
- Command Logging with Audit Trail
- Non-Connect Port Buffering
- Co-Location Features
- Any-to-Any Port Switching
- Port-Specific Password Protection
- Easy-to-Use Menu/Commands
- AC 120V and 230V Models
- NEMA 5-15 or IEC-C13 Outlet Receptacles
|
Applications:
- Local or Remote Console Port Switching
- UNIX Serial Console Management
- TCP/IP, Dial-Up, SSH or Telnet Access to Consoles at Remote Locations
- Share Multiple Console Ports Using a Single VT100 Terminal or PC
- In-Band/Out-of-Band Network Management
|
We want to know what
you think!
Here's your chance to share your opinion on this item with the world! Your
feedback may be very valuable to other customers in making a purchasing
decision. We appreciate your input and hope you will be a regular part of our
community. Note that all reviews are subject to our Terms and Conditions. All
reviews are moderated and will not appear until reviewed by our company.
| | | | |  |
| | | Special Offers | | Rack PDU RSM-8: SSHv2 Remote Site Manager with Internal Modem, 8-Port, SSHv2, Telnet, RS-232, 100/240V AC (Model:RSM-8) | | | Rack PDU RSM-16: SSHv2 Remote Site Manager with Internal Modem, 16-Port, SSHv2, Telnet, RS-232, 100/240V AC (Model:RSM-16) | | | Rack PDU RSM-16DC : SSHv2 Remote Site Manager with Internal Modem, 16-Port, SSHv2, Telnet, RS-232, -48V DC (Model:RSM-16DC ) | | | Rack PDU RSM-32: SSHv2 Remote Site Manager with Internal Modem, 32-Port, SSHv2, Telnet, RS-232, 100/240V AC (Model:RSM-32) | | | Rack PDU RSM-32DC : SSHv2 Remote Site Manager with Internal Modem, 32-Port, SSHv2, Telnet, RS-232, -48V DC (Model:RSM-32DC ) |
|
|
|
Products
