12.1" Rugged High Brighntess/Sun Light Readable Marine LCD Display 1000 Nits. Optional Elo SAW TouchScreen Model:(WPM-MAR-H1200M4)

Dimming 0~100%

Sunlight Readable

PIP

IP65 Proof

8- to36V DC input

Anti-Corrosion (Option)

OSD from panel

AR Safety Glass (option)

Touch Screen

Features:
Hyper Dimming	:Dimming knob control backlight brightness from nearly 0% to 100%
Sunlight Readable	:High brightness TFT-LCD panel enhance the best visibility
Ruggedized IP65 Proof	Panel (flush) mount IP65 aluminum housing with powder coating design (IP54 rear)
Wide Voltage Range Input	8 to 36V DC to DC power input acceptable(AC power for option)
Touchscreen	:High quality touchscreen / AR protection glass for option
IP65 OSD front panel Design	:Ease of use front panel OSD control
Anti-shock and Vibration	:Enhanced shock and vibration resistance

Specifications

TFT Characteristics
Pixel Number	1024x768
Pixel Pitch(R&B)	0.264 (H) x 0.264 (V)
Contrast Ratio	700 : 1(typ.)
Light Intensity	1000 (typ.)
Viewable Angle	-60~60 (H); -75~45 (V)
Active Display Area	245.76 (H) x 184.32 (V)
Max Colors	16.7M (8bits/color)
Input Signals
RGB Signal	D-SUB 15P connector(female)
Composite Video	RCA phono plug
S-Video Signal	S-Video (SVHS) plug
DVI-D Signal	DVI-D input 24pin connector
DC Power Signal	Screw terminal block
AC Power Signal (Optional)	Std IEC Inlet
Touch Screen (Optional)	D-SUB 9P connector (female)
Remote via RS-232 (Optional)	D-SUB 9P connector (female)
User Controls
Power On/Off via front button VR Brightness Knob Control On Screen Display control(OSD) OSD Remote Control via RS-232 Power Mode Status LED
Power Specification
Power Supply Options	8 to 36 V DC to DC power supply with terminal block. 90 to 265 V AC (optional)
Power Consumption	54 W typical, normal operation
Environmental Considerations
Operating Temperature	-10 to 55 deg.C (-20 to 60 deg.C for optional heating)
Humidity	5% to 95% (non condensing)
Anti-Vibration	5Hz~500Hz / 1Grms/3 Axis
Anti-Shock	15G, 11ms duration
Available Options
Mechanical Options	Panel (Flush) mount with IP65 (SAW touch for IP54)
Touch Screen Options	SAW, 5 Wire Resistive
AR Safety Glass Option	3mm Anti-reflective protection glass
VESA Mounting	Yes
Certification and Approvals
Certification	CE, FCC
Approvals	DNV Type Approval (Pending)