IP65 Front Panel Mount Metal Housing High Brightness 24" LCD 1920*1080 1000nits 3000:1 with VGA + DVI input (Model: YPMW2400PHB)

IP65 Front Panel Mount Metal Housing High Brightness  24"  LCD  1920*1080  1000nits  3000:1 with  VGA + DVI  input (Model: YPMW2400PHB)

IP65 Front Panel Mount Metal Housing High Brightness 24" LCD 1920*1080 1000nits 3000:1 with VGA + DVI input (Model: YPMW2400PHB)

YPMW2400PHB
  • Overview
  • Download

Features:

Sunlight Readable.
24” Full-HD TFT LCD with resolution up to 1920x1080.
Suitable for military, tablet, ruggedized PC, kiosk, advertising, POS, marline, transportation, gaming, gas pump.

 

System Specs:

Item Specification
Panel Type 24-inch TFT LCD
Screen Diagonal 24-inch
Active Display Area (mm) 531.36 (H) x 298.89(V)
Pixel Pitch (um) 276.75 (per one triad) x 276.75
Number of Pixels 1920(x3) x 1080
Contrast Ratio 3000: 1
Color Arrangement R.G.B. Vertical Stripe
Brightness (cd/m) 1000 cd/m
Viewing Angle(Typ.) 89/89/89/89 (R/L/U/D)
Signal Connector 15 PIN D-Sub, DVI-D
Power Source AC100 ~ 240V, Universal +/- 10%
Power Consumption 45(Typ)
Power Management VESA DPMS Compliant
Operating Temperature 0 ~ +50C
Storage Temperature -20 ~ +60C
Plug & Play VESA DDC 1/2B
 

Clamp Mount

 

Order Information

Touch Screen (Optional)
N: No touch screen or glass.
G: Glass (AR Coating).
R: 5-Wires Resistive, RS232.
U: 5-Wires Resistive, USB
A: 3M Microtouch capacitive, RS232.
B: 3M Microtouch capacitive, USB.
Signal Input
C: VGA only.
D: VGA + DVI-D.
E: VGA + DVI-D + Audio.
J: VGA + DVI-I + Audio
HDMI
Color
B: Black
S: Sliver
Other
N: N/A
P: Panel mount kits.

Installation Guide for Panel Mount Product:

You better have at least 2 people to do the installation. One is at the front side of the mounting wall, another is at the back side of the mounting wall.
 
 
1. Get the Mechanical Drawing :
You can get the mechanical drawing of your product model from our web site : www.itechlcd.com . If you cant find the correct mechanical drawing, contact your local dealer.

2. Make the cut out :

There is the cut out dimension in the Mechanical Drawing. Make sure your cut out meet the cut out dimension requirement. If the cut out is too small, there will be some interference. If the cut out is too big, you cant have the panel
mounting securely. Please note that there is thickness limitation of the mounting wall for panel mount installation.

3. Prepare the accessory :

For panel mounting kit installation, you will receive mounting kits and screws together with your unit and you have to prepare the screw driver by yourself. There are at least 2 mounting kits for each side of the panel. The mounting kit and the screw is paired.

4. Installation :
4-1. Put the monitor in the cut out from the front side of the mounting wall. The best way to mount the panel is to align the bottom of the panel housing with the bottom edge of the cut out. This way can help hold the panel steadily.
 
 
4-2. At the back side of the mounting wall, insert the mounting kits into the slide hole at the side bracket on the panel.
4-3. Put the screw on the mounting kits and screw it tightly.
4-4. Finish all the mounting kits one by one then you can have a secure installation for your Panel Mount product.