Digital KVM Extender (Model: CE790)

Digital KVM Extender (Model: CE790)
  • Front View
  • Back View

Digital KVM Extender (Model: CE790)

CE790
  • Overview
  • Specifications
  • Download
 

Digital KVM Extender

 
The CE790 is a IP based KVM Extender with automatic cable detection (Auto-MDIX) and RS-232 serial functionality that allows access to a computer system from a remote USB console (USB keyboard, monitor, and USB mouse) anywhere on the intranet.

The CE790 improves on previous designs by: 1) the addition of an intuitive On Screen Display (OSD) on both the transmitter and receiver units for easy setup and operation; 2) working over a standard TCP/IP LAN via inexpensive Cat 5e cable, allowing point-to-point, point-to-multipoint, and multipoint-to-multipoint administration without the need for an additional KVM switch; and 3) the addition of an RS-232 port, on both the transmitter and receiver Units - to connect to a serial terminal for configuration, and serial devices such as touchscreens and barcode scanners.

* The CE790 can be installed in point to point, point to multipoint and multipoint to multipoint configurations. Multipoint configurations require a separate purchase - contact your delear for details.

* In multipoint configurations, the IGMP (Internet Group Management Protocol) function of your network switches/hubs should be enabled to avoid deterioration of data throughput. If you do not know how to enable IGMP, please contact your network administrator.
 

Features

 
Remotely access computers on your KVM installation via intranet
Dual console operation - control your system from both the transmitter and receiver USB consoles
OSD (On Screen Display) on both the transmitter and receiver units
No software required - an HTTP server is embedded in both units
Built-in ASIC for greater reliability and compatibility
USB Keyboard and USB Mouse Ports
RS-232 serial ports - allows you to connect to a serial terminal for configuration, or serial devices such as touchscreens and barcode scanners
Audio enabled
USB overcurrent detection and prevention
High resolution video - up to 1920 x 1080
Supports widescreen formats
Ultra-High quality video mode
Hot pluggable
Rack mountable
Firmware upgradable
Auto-MDIX - automatically detects cable type
 

Package Content

 
1x CE790T Digital KVM Extender (Transmitter)
1x CE790R Digital KVM Extender (Receiver)
1x USB KVM Cable (CE790T)
2x Power Adapters
2x Rack Mount Kits
2x Grounding Wires
1x User Manual
1x Quick Start Guide
 

Diagram

 
 
Function CE790T CE790R
Connectors Console
Ports
Keyboard 1 x USB Type A Female (White)
Video 1 x HDB-15 Female (Blue)
Mouse 1 x USB Type A Female (White)
Speaker 1 x Mini Stereo Jack Female (Green)
Mic. 1 x Mini Stereo Jack Female (Pink)
KVM
Ports
Keyboard/ Video / Mouse 1 x SPHD-17 Female(Yellow) N/A
Speaker 1 x Mini Stereo Jack(Green)
Mic. 1 x Mini Stereo Jack (Pink)
RS-232 1 x DB-9
Female (Black)
1 x DB-9 Male
(Black)
Power 1 x DC Jack (Black)
LAN 1 x RJ-45 Female (Black)
Pushbuttons OSD 1 x Pushbutton
Select 1 x Pushbutton
LEDs Status 1 (Green / Orange)
Power 1 (Green / Red)
Emulation Keyboard / Mouse USB
Power Consumption DC5.3V/6.62W DC5.3V/6.36W
Video Up to 1920 x 1080
Environment Operating Temp. 0 - 50°C
Storage Temp. -20 - 60°C
Humidity 0-80% RH, Non-condensing
Physical Properties Housing Metal
Weight 0.50 kg 0.48 kg
Dimensions
(L x W x H)
20.00 x 8.00 x 2.50 cm
* The specification and pictures are subject to change without notice.
* All trademarks and logos are the properties of their respective holders.