32" Industrial touch Screen LCD-NEC-3M-DST (Model:RCH3200N-TSB-DST)

• 1366 x 768 ultra-high resolution (1920 x 1080 for LCD5710) for true 16:9 aspect ratio

• New backlight system leads to higher power effi ciency and a longer display life

• Improved CableComp™ technology equalizes the video signal to eliminate color halos on long cable runs (LCD4010, LCD4610 and LCD5710)

• High-definition capable display supports 480i, 480p, 720p and 1080i (1080p for LCD5710)

• Video detect automatically fi nds the first or last signal used for easy setup

• New backlight system leads to better brightness uniformity

• Screen saver function reduces the risk of image persistence for extended display life

• Picture-in picture (PIP) places a smaller video frame within the full-screen video frame

• Zoom mode enables you to customize the screen size in three directions

• Gamma adjustment reduces the effect of high contrast images on long-term image quality

• Picture-on-picture (POP) places a smaller video frame next to the full-screen video frame (LCD4010, LCD4610 and LCD5710)

• TileMatrix™ allows you to build video walls (up to 25 displays in a 5x5 matrix [4x4 for LCD3210] equalling almost 20 ft. diagonal)

• Side color function adjusts black bars in 4:3 mode to reduce the risk of image persistence with extended use

• Side-by-side view places two video frames of equal size next to each other (LCD4010, LCD4610 and LCD5710)

• Gamma selection lets you adjust the screen to your preferred settings (2.2, 2.4, S-Curve or native)

• Real-time clock allows for content scheduling and monitor sleep/wake management, improving energy savings and extending display life

• TileComp™ works in tandem with TileMatrix to compensate for the bezel width and create a more seamless video wall

• Image fl ip allows you to properly display content originally prepared for alternative display technologies such as rear projection (LCD4010, LCD4610 and LCD5710)

• Internal temperature sensors control self-protective circuits to minimize heat damage

• Black level expansion improves image quality in shaded and darker images

• Film mode delivers a smoother image for DVD movies

• Self-diagnostic capabilities help detect possible failure points via queries through DDC/CI and RS-232C

• DDC/CI enables communication between the PC and monitor for display management, diagnostics and the remote control

• Brightness control reduces energy consumption and heat generation while extending display life

• Power-on delay allows for multiple displays on a single electrical circuit

• 6-axis color control engine allows for precise and simplifi ed color, color temperature and saturation adjustment (LCD4010, LCD4610 and LCD5710)

• Daisy chain capability enabled through RS-232C allows for individually addressable display control (LCD4010, LCD4610 and LCD5710)

Fundamentally Different Touch for Interactive Signage

For most popular large-format touch technologies “touch position” is calculated when a finger interrupts an optical field, infrared light beams or acoustic waves on or above the surface of the touch screen substrate. Relying on these “active” surface properties makes these technologies susceptible to different types of interference or environmental limitations, which makes 3M's Dispersive Signal Technology (DST) a fundamentally different touch solution for large-format display applications.

The MicroTouch™ DST Touch System, based on 3M Dispersive Signal Technology, consists of a chemically-strengthened glass substrate with piezos mounted on each corner, mated to a sophisticated, dedicated controller. The DST Touch System determines the touch position by pinpointing the source of “bending waves” created by finger or stylus contact within the glass substrate. This process of interpreting bending waves within the glass substrate helps eliminate traditional performance issues related to on-screen contaminants and surface damage, and provides fast, accurate touch attributes.