17" Rugged Panel Mount LCD Monitor with Touchscreen and NEMA 4X Rated (Model: HPM17)

The HPM17 Industrial LCD Monitor has been designed to provide the industrial user with superior picture quality and state-of-the-art features housed in a rugged industrial enclosure, which will assure reliable operation in most factory environments.

With a panel mount enclosure and depth of only 52.5 mm (2.07") it easily fits into small spaces. And its high-resolution 17" display offers the industrial user the optimal trade-off between screen size and cost.

Features

• 17" active-matrix LCD display
• UL Rated for Class I, II, III, Division 2 Hazardous Locations (optional)
• 1280 x 1024 resolution
• Long-life backlights
• High brightness, high contrast
• Black powder coated steel or Stainless Steel faceplate
• NEMA/UL Type 12/4 or 12/4/4X
• Tempered Safety Glass window option
• Analog Resistive Touchscreen option
• Only 52.5 mm (2.07") deep behind panel
• Panel mount capable without drilling stud holes
• Rack mount option

Specifications

Display

• Thin-film Transistor (TFT) Active Matrix Liquid Crystal
• Size - 17" diagonal
• Image Size (W x H) - 338 mm x 270 mm (13.3" x 10.6")
• Native Resolution - SXGA (1280 x 1024, 5:4 aspect ratio)
• Plug and Play - VESA DDC 2B
• Minimum Resolution - 640 x 350
• Pixel Pitch - 0.264 mm x 0.264 mm
• Number of Colors - 16.8 million
• Viewing Angle (Hori/Vert), typical - 170° / 155°
• Brightness - 280 nits (cd/m2) max
• Contrast Ratio (typical) - 600:1
• Backlight - Four CCFTs (Cold Cathode Fluorescent Tube); 50,000 hours to half brightness; replaceable
• Screen Protector (when not shipped with touchscreen) - Tempered glass to ANSI-Z97.1 SPEC; AR coated on both sides; 98% Transmission of light; 99% Reduction of glare; 53% UV blocking; 30% NIR Blocking

Video

• Input Connectors
• HD-15
• Optional BNC input (using HD-15 to 5-wire BNC adapter); see "Input Signal Formats" for a list of compatible video signals
• Input Signal Formats
• RGB Analog video, 0.7V p-p Positive at 75 Ohms (+/-5%), TTL Level (V high ≥ 2.0 V, V low ≤ 0.8 V); Compatible sync modes: Separate H/V sync
• NTSC/PAL composite input available (call for details)
• Horizontal Scan - 30-82 kHz
• Vertical Scan - 50-85 Hz
• Supported Video Standards - Std. VGA - 640 x 480 @ 60 Hz; SVGA - 800 x 600 @ 60 Hz; XGA - 1024 x 768 @ 60 Hz; SXGA - 1280 x 1024 @ 60 Hz (native); see user manual for a full list of resolution and timing compatibility
• Response Rate (typical) - 8 ms

Electrical

• Power Input - 120/240 VAC, 1.5/0.75 A, 60/50 Hz
• Power Consumption (typical) - 36 W
• Power Consumption (standby mode) - < 2 W

Enclosure

• Type - Panel mount; rear collar compresses gasket against panel (5/16" maximum panel thickness); held by 12 M5 studs
• Panel Rating - NEMA/UL Type 12/4 or 12/4/4X (with proper installation) - built to IP66 standards.
• Black Powder Coated Steel or Stainless Steel faceplate

Environmental

• Temperature - 0° to 50°C (32° to 122°F)
• Humidity - 20% to 90% non-condensing
• Operating Shock - 25 g, 6 msec, half-sine
• Operating Vibration (sine) - 1.0 g, swept sine 9-500 Hz
• Transport Vibration (random) - 0.1g² / Hz, 10-200 Hz; 0.03g² / Hz, 200-2000 Hz
• Altitude - Operating: up to 10,000 feet; Non-operating: up to 40,000 feet
• Environmental Sulfur Gas Protection Option - includes glass-armored touchscreen, vapor-phase corrosion inhibitor, and extensive sealing; consult sales for details.

Functional

• Panel Controls - 1, 2, Power, Down, Up
• OSD (On Screen Display) Controls - Auto Image Adjust, Contrast/Brightness, Color Adjust, Information, Manual Image Adjust, Setup, Memory Recall

Physical

• Depth - 52.5 mm (2.07") behind panel maximum
• Bezel Options- Carbon Steel, black powder coat; Stainless Steel
• Front Bezel Outside Dimensions (W x H x D) - 437.8 mm x 353.6 mm x 7.1 mm (17.24" x 13.92" x 0.28") (not including gasket)
• Cutout Dimensions (W x H) - 406.9 mm x 323.1 mm (16.02" x 12.72"); +/- 0.5 mm (0.020")
• Net Weight - 16 lbs.
• Shipping Weight - 19 lbs.

Touchscreen Option

• 5-wire resistive system
• Emulates a mouse
• RS-232 or USB interface to host computer (both connections are present on touchscreen monitors)

Rack Mount Option

• Adapter panel provides for mounting into standard 19" EIA rack
• 7U height

Accessory Mounting Bracket Option

• Allows attachment of thin clients, KVM Extenders, small PC's, or other devices to the rear of the display
• Supports up to 25 lbs.
• Standard 75mm and 100mm VESA mounting holes provided
• More on Accessory Mounting Bracket

Compliances and Certifications

• UL 60950-1 / cUL Recognized Component (File No. E212889)
• UL 508A Listed (File No. E318630)
• FCC Class A
• CE
• RoHS
• WEEE (Registration No. WEE/DJ1859ZX for UK only)
• IEC 60721-3
• UL 50E (File No. E318630)
• Rated for Hazardous Locations (optional) - UL Listed for Class I, Division 2 for Groups A, B, C, D; Recognized for Class II, III, Division 2 for Groups F, G; Temp Code T6 (File No. E328481) per ANSI/ISA 12.12.01-2007