Features

• WXGA (1280 x 800 pixels) resolution.
• LVDS (Low Voltage Differential Signaling) interface.
• LED light source.
• Industry Application.
• 13.3” TFT Liquid Crystal Display module.
• 20 pins LVDS interface.
• supports 1280 x 800 WXGA mode.
• Display 262K or 16.2M colors.
• Converter circuit for LED is built in.

Specifications

Item	Specification	Unit	Note
Diagonal Size	13.3	inch
Active Area	286.08 x 178.8	mm	(1)
Bezel Opening Area	289.1 x 181.8	mm
Driver Element	a-si TFT active matrix	-	-
Pixel Number	1280 x R.G.B. x 800	pixel	-
Pixel Pitch	0.2235 x 0.2235	mm	-
Pixel Arrangement	RGB vertical stripe	-	(2)
Display Colors	262k or 16.2M	color	-
Display Mode	Normally White	-	-
Surface Treatment	Anti-glare, Hard Coating ( 3H )	-	-
Module Power Consumption	6.9	W	Typ.

Item		Symbol	Condition	Min.	Typ.	Max.	Unit	Note
Center Luminance of White		LC	θx=0°, θY =0° Viewing Normal Angle	1000	1000		cd/m2	(4), (6)
Contrast Ratio		CR		550	800		-	(2), (6)
Response Time		Tr			6	11	Ms	(3)
		Tf			10	15	Ms
White Variation		5W			1.25	1.4	-	(5), (6)
Viewing Angle	Horizontal	ex+	CR ^ 10	60	70		Deg.	(1), (6)
		Ux-		60	70
	Vertical	6Y+		50	60
		WY-		50	60

No.	Test Item	Test Condition	Note
1	High Temperature Storage	80℃, 240 hours	(1) (2)
2	Low Temperature Storage	-30℃, 240 hours
3	Thermal Shock Storage	{(-30℃, 0.5 hour) (80℃, 0.5 hour)}, 100 cycles
4	High Temperature Operating	70℃, 240 hours
5	Low Temperature Operating	-30℃, 240 hours
6	High Temperature & High Humidity Operating	60°C, 90% RH, 240hours
7	Shock (Non-Operating)	200G, 2ms, half sine wave, 1 time for ± X, ± Y, ± Z.	(3)
8	Vibration (Non-Operating)	1.5G,10~300Hz,10min/cycle,3 cycles each X,Y,Z	(3)

Note (1) There should be no condensation on the surface of panel during test.
Note (2) The temperature of panel display surface area should be 80℃ Max.
Note (3) At testing Vibration and Shock, the fixture in holding the module has to be hard and rigid enough so that the module would not be twisted or bent by the fixture.
Note (4) In the standard conditions, there is no function failure issue occurred. All the cosmetic specification is judged before the reliability test.